win10系統bcd修復,windows10bcd修復

win10系統bcd修復

1. 使用Windows 10 安裝光盤或U盤啟動電腦。

2. 進入“修復計算機”模式。

3. 在“選擇一個選項”中選擇“疑難解答”。

4. 在“高級選項”中選擇“命令提示符”。

5. 在命令提示符中輸入“bootrec /fixmbr”回車。

6. 在命令提示符中輸入“bootrec /fixboot”回車。

7. 在命令提示符中輸入“bootrec /rebuildbcd”回車。

8. 選擇“是”以確認修復啟動項并重建BCD存儲器。

9. 重啟電腦。

windows10bcd修復

There are a few ways to repair or rebuild the boot configuration data (BCD) on a Windows 10 computer, depending on the specific issue and level of access to the system. Here are some possible steps you can try:

1. Use automatic repair

If your Windows 10 computer cannot start up properly due to BCD errors, you can use the automatic repair feature built into the operating system. This feature can help diagnose and fix startup issues, including problems with BCD. Here's how to perform an automatic repair:

1. Insert the Windows 10 installation media (such as a DVD or USB flash drive).

2. Restart your computer and boot from the installation media.

3. Select your language preferences and click Next.

4. Click on the "Repair your computer" option in the lower left corner.

5. Choose "Troubleshoot" and then "Advanced options."

6. Select "Startup Repair" and follow the on-screen instructions to complete the repair process.

Note that the exact steps may vary depending on your system and installation media.

2. Use bootrec commands

If the automatic repair option doesn't work or you have more advanced issues with BCD, you can use the command prompt and run some bootrec commands to repair or rebuild the BCD. Here are the steps:

1. Boot your computer from the Windows 10 installation media as described above.

2. Choose "Command Prompt" from the advanced options screen.

3. Type the following commands one at a time and press Enter after each one:

bootrec /fixmbr

bootrec /fixboot

bootrec /scanos

bootrec /rebuildbcd

4. Follow the prompts and answer "Y" or "Yes" if prompted to add the Windows installation to the BCD.

5. Restart your computer and check if the BCD issues have been resolved.

3. Use recovery options

If your Windows 10 system has a recovery partition (or you have created a system image or backup), you can use the recovery options to restore your computer to a previous state before the BCD errors occurred. Here's how to do it:

1. Restart your computer and repeatedly tap the F11 key (or another key depending on your system) during boot to access the recovery options.

2. Choose "Troubleshoot" and then "Advanced options."

3. Select "System Restore" or "System Image Recovery" and follow the on-screen instructions to restore your system to a previous state when it was working properly.

4. Check if the BCD issues have been resolved after the restore process is complete.

Note that system restore or system image recovery may erase some of your recent data, so make sure to back up your important files before attempting this option.

In any case, if you're not comfortable or confident with these steps, you may want to seek professional help or contact Microsoft support for further assistance.

win10boot bcd錯誤修復

以下是修復Win10引導BCD錯誤的步驟：

1.使用Windows 10安裝媒介，進入“安裝界面”。

2.在安裝界面的頂部，選擇“修復您的電腦”。

3.在接下來的界面中，選擇“疑難解答”選項。

4.在疑難解答界面中，選擇“高級選項”。

5.在高級選項界面中，選擇“命令提示符”。

6.在命令提示符中，輸入“bootrec /fixmbr”并按回車鍵。

7.完成后，再輸入“bootrec /fixboot”并按下回車鍵。

8.最后，再輸入“bootrec /rebuildbcd”并按下回車鍵。

9.在命令執行完畢后，退出命令提示符窗口，關閉計算機。

10.重新啟動計算機，看看是否修復了BCD錯誤。

win10開機bcd錯誤怎么修復

以下是修復win10開機bcd錯誤的步驟：

1. 使用Win10安裝盤啟動電腦。在進入安裝界面后，單擊“修復計算機”。

2. 選擇“故障排除”。

3. 選擇“高級選項”。

4. 選擇“命令提示符”。

5. 在命令提示符界面輸入“bootrec /fixmbr”并按回車鍵。

6. 輸入“bootrec /fixboot”并按回車鍵。這將重新構建你的系統啟動區。

7. 輸入“bootrec /scanos”并按回車鍵。這將掃描所有的可用Windows系統。

8. 輸入“bootrec /rebuildbcd”并按回車鍵。這將重建BCD數據，讓它包含所有安裝的Windows系統記錄。

9. 重啟你的計算機。

以上就是修復win10開機bcd錯誤的步驟，希望能幫到你。

window10bcd怎么修復

如果你的Windows 10啟動時出現了“BCD文件錯誤”或“無法啟動Windows”等問題，可以嘗試以下幾種方法修復BCD:

方法一：使用Windows 10的自動修復工具：

1. 在Windows 10的安裝介質中進入“修復你的電腦”選項。

2. 選擇“疑難解答”>“高級選項”>“啟動修復”。

3. 等待自動修復完成。

方法二：使用命令提示符進行修復：

1. 在Windows 10的安裝介質中進入“修復你的電腦”選項。

2. 選擇“疑難解答”>“高級選項”>“命令提示符”。

3. 在命令提示符窗口中輸入以下命令并依次按下回車鍵：

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd

4. 在提示時選擇“是”或“Y”。

5. 重啟電腦，看是否修復成功。

方法三：使用第三方修復工具：

如果以上方法無法修復BCD，則可以嘗試使用第三方修復工具如EasyBCD或BCD Editor等。

注意：在嘗試修復BCD之前，最好備份你的重要數據以避免數據丟失。