win10系統bcd修復

win10系統bcd修復

1. 使用Windows 10 安裝光盤或U盤啟動電腦。

2. 進入“修復計算機”模式。

3. 在“選擇一個選項”中選擇“疑難解答”。

4. 在“高級選項”中選擇“命令提示符”。

5. 在命令提示符中輸入“bootrec /fixmbr”回車。

6. 在命令提示符中輸入“bootrec /fixboot”回車。

7. 在命令提示符中輸入“bootrec /rebuildbcd”回車。

8. 選擇“是”以確認修復啟動項并重建BCD存儲器。

9. 重啟電腦。

window10bcd怎么修復

如果你的Windows 10啟動時出現了“BCD文件錯誤”或“無法啟動Windows”等問題，可以嘗試以下幾種方法修復BCD:

方法一：使用Windows 10的自動修復工具：

1. 在Windows 10的安裝介質中進入“修復你的電腦”選項。

2. 選擇“疑難解答”>“高級選項”>“啟動修復”。

3. 等待自動修復完成。

方法二：使用命令提示符進行修復：

1. 在Windows 10的安裝介質中進入“修復你的電腦”選項。

2. 選擇“疑難解答”>“高級選項”>“命令提示符”。

3. 在命令提示符窗口中輸入以下命令并依次按下回車鍵：

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd

4. 在提示時選擇“是”或“Y”。

5. 重啟電腦，看是否修復成功。

方法三：使用第三方修復工具：

如果以上方法無法修復BCD，則可以嘗試使用第三方修復工具如EasyBCD或BCD Editor等。

注意：在嘗試修復BCD之前，最好備份你的重要數據以避免數據丟失。

windows10bcd修復

There are a few ways to repair or rebuild the boot configuration data (BCD) on a Windows 10 computer, depending on the specific issue and level of access to the system. Here are some possible steps you can try:

1. Use automatic repair

If your Windows 10 computer cannot start up properly due to BCD errors, you can use the automatic repair feature built into the operating system. This feature can help diagnose and fix startup issues, including problems with BCD. Here's how to perform an automatic repair:

1. Insert the Windows 10 installation media (such as a DVD or USB flash drive).

2. Restart your computer and boot from the installation media.

3. Select your language preferences and click Next.

4. Click on the "Repair your computer" option in the lower left corner.

5. Choose "Troubleshoot" and then "Advanced options."

6. Select "Startup Repair" and follow the on-screen instructions to complete the repair process.

Note that the exact steps may vary depending on your system and installation media.

2. Use bootrec commands

If the automatic repair option doesn't work or you have more advanced issues with BCD, you can use the command prompt and run some bootrec commands to repair or rebuild the BCD. Here are the steps:

1. Boot your computer from the Windows 10 installation media as described above.

2. Choose "Command Prompt" from the advanced options screen.

3. Type the following commands one at a time and press Enter after each one:

bootrec /fixmbr

bootrec /fixboot

bootrec /scanos

bootrec /rebuildbcd

4. Follow the prompts and answer "Y" or "Yes" if prompted to add the Windows installation to the BCD.

5. Restart your computer and check if the BCD issues have been resolved.

3. Use recovery options

If your Windows 10 system has a recovery partition (or you have created a system image or backup), you can use the recovery options to restore your computer to a previous state before the BCD errors occurred. Here's how to do it:

1. Restart your computer and repeatedly tap the F11 key (or another key depending on your system) during boot to access the recovery options.

2. Choose "Troubleshoot" and then "Advanced options."

3. Select "System Restore" or "System Image Recovery" and follow the on-screen instructions to restore your system to a previous state when it was working properly.

4. Check if the BCD issues have been resolved after the restore process is complete.

Note that system restore or system image recovery may erase some of your recent data, so make sure to back up your important files before attempting this option.

In any case, if you're not comfortable or confident with these steps, you may want to seek professional help or contact Microsoft support for further assistance.

Win10 BCD修復怎么辦

如果您的Win10無法啟動，并且出現了錯誤信息“Boot Configuration Data（BCD）缺失或損壞”，則需要進行BCD修復。以下是一些修復BCD的方法：

方法1：使用Windows 10安裝光盤進行修復

1. 將Windows 10安裝光盤插入計算機

2. 選擇“修復您的計算機”選項

3. 選擇“疑難解答”>“高級選項”>“命令提示符”

4. 在命令提示符中，輸入以下命令并按“Enter”鍵：

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd

方法2：在Windows 10安全模式下進行修復

1. 重啟計算機，并按F8鍵進入“高級啟動選項”

2. 選擇“安全模式”選項，進入Windows 10安全模式

3. 按Win鍵+X鍵，選擇“命令提示符（管理員）”

4. 在命令提示符中，輸入以下命令并按“Enter”鍵：

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd

以上兩種方法都可以試試看，如果遇到問題可以尋求專業人士的幫助。

window10 bcd損壞

如果您的Windows 10啟動時提示BCD損壞，您可以嘗試以下步驟來修復它：

1. 在Windows 10安裝媒體中進入“修復你的計算機”選項。您可以使用DVD、USB閃存驅動器或其他啟動介質。

2. 選擇“故障排除”>“高級選項”>“命令提示符”。輸入以下命令：

`bootrec.exe /fixmbr`

`bootrec.exe /fixboot`

`bootrec.exe /rebuildbcd`

3. 重啟計算機并檢查是否解決了問題。

如果這些步驟無法解決問題，您可能需要重新安裝Windows 10或者求助于專業技術支持。